Best RC Servos of 2025

"I found that these servos work great, but I had to adjust the rates since they're at 270%. I'm using them in a Tamiya TT-02."

"I bought these for my 1/8 scale Nitro Sprint car, and they haven't disappointed in torque. The waterproof aspect is a nice bonus since these cars get really dirty."

"I used these as replacements for my old Futaba servos on my re-release Tamiya cars. They function well, but I had to make a small cut for the larger connections. Let's see how long they last!"

"I found these servos to be very good quality. I used them with a Raspberry Pi camera to add tilt and pan functionality. Attaching the camera was a bit challenging, but overall, it works well and wasn't overly complicated to set up!"

"For my robotics project, I needed small servos that wouldn't break the bank. These were inexpensive yet very accurate and quiet, providing more than enough power for my requirements. I'm really pleased with this product!"

"I bought these servos for my Deerc RC boat. Although the included plug didn't match, the leads were long enough for me to solder my old plug onto the servo. Now it works as expected, and I have a few extras in case of failure!"

“I found this set of small servos to be great for my proof of concept project. They may not be super powerful, but they do the job as expected. I connected one to a servo controller, and it was very quiet with 180 degrees of movement. This assortment of 10 servos is a satisfactory purchase.”

“For my first fixed-wing build, the servos fit perfectly and worked flawlessly from the start. After at least 10 flights, they’ve held up well with my receiver and battery setup. Plus, the price is unbeatable, and I appreciated having some spare servos just in case.”

“I recently bought a 10-pack of these servos for my DIY robotics projects, and my experience has been mixed. While the working servos delivered good torque and responsiveness, I was disappointed when 4 out of the 10 were defective right out of the box. The reliable units are great, but the quality control issues make it hard for me to recommend them without hesitation.”

"I installed four of these in my custom-built 90" P-38 Lightning Giant Scale RC aircraft. These servos are powerful and low-profile. Best price I found on Amazon, but allow two weeks for shipping."

"I bought this for my Traxxas 4-Tec 3.0 Stingray because I was tired of the poor quality stock servo. This one fit perfectly and has plenty of power and speed. It's been through tough conditions and still works like a champ. I highly recommend it!"

"I purchased this servo to get my old Associated TC3 running again. I haven't installed it yet, but it looks very promising."

"I bought 40 servos on sale for my projects, and while 3 had minor issues, they were fixable. Overall, at this price, they are fantastic. Just be cautious with heavy loads as they can heat up."

"I was impressed with these low-cost servos for my robotic projects. They were easy to 360 mod and have great torque, although they are slightly slower than my other servos."

"For my classic Tamiya builds, these servos were good enough and worked perfectly. They are not high performance, but with metal gears, they are solid and I plan to buy more soon!"

“I find this servo to be my favorite low profile option. It performs as well as servos that cost four times more. Just ensure your endpoint adjustments are set, and it should last a long time.”

“Having tried various servos, I can say the JX 4409 stands out for its speed and centering, though it could be improved. This low-profile servo is a great compromise between speed and torque, especially for the price.”

“I’ve been using Injora servos for a while and they’ve consistently delivered fast response and good torque across my Tamiya 1/10 scale cars. This model is perfect for everything, including my TT-02 and Lunchbox.”

"For the price, this servo is a great value. It's not a speed demon, but it offers more torque than the stock Traxxas steering servo I replaced. I highly recommend it, especially for rock crawling due to its ample torque."

"I bought three of these servos and I'm very pleased. I installed one on my Slash 4x4 VXL, and it centers perfectly every time. The other two went on a crawler. They may not be the quietest or fastest, but they seem strong and durable. For the price, you really can't go wrong!"

"I finally completed my project and installed the servo. It worked fine for a couple of hours, but then it overheated and burned out. I wish I had chosen a higher kg for my application, but it performed significantly better than what I previously had on my crawler."

“I had to replace the steering servo in my Haiboxing 2997a, and this servo is overkill for that truck. It's fast and torque-y, and I'm not worried about replacing it again. It does its job exceptionally well.”

“I usually don't write reviews, but this servo is excellent for the money. I have three of them in my Granite, Capra, and custom-built rock crawler. They make no noise and work perfectly. I'll definitely buy more for my other rigs.”

“This servo is currently on my 6s fireteam, and for the price, it's great. It has outlived my Savox servo, which I find overrated. It steers my overpowered Kraton 6s very well, even with oversized wheels. I'm impressed with its fast response and strong performance.”

"These Metal Gear Micro Servos are fantastic for my projects that need higher torque. I used them to create a smart plunger stop lift for a water tank, and they performed wonderfully! They come with three different lever arms and mounting screws, making it easy to get started."

"I bought these for a robot arm project, and they were advertised as 180-degree servos. However, they turned out to be continuous rotation instead. Unfortunately, I didn't test them until the end of my project, so I missed the return window. I'll keep them for another use, but it did slow me down."

"I ordered this as a replacement for an MG996R, but it didn't fit my metal framework due to its different depth. Unfortunately, it seems to be a non-standard part, so I'll be returning it."

"I added this to my new 3s truggy build and it works great. Very responsive at 7.4v, though it was a bit sluggish at 6v. For the cost, it's a great budget servo."

"I replaced a weak HPI stock steering servo on my Savage XL with this. Huge difference! Running on 7.4v, it can turn my big tires at HIGH speed on various surfaces. I’m really impressed and plan to replace the throttle servo with one of these soon."

"Using this servo to rotate my solar tracker, which weighs about 2-3kg. I was surprised it handled the weight with just 5V from a USB power bank without any problems. All good!"